- Product Details
- Clinical Technique
- Technical Details
- Video
- Configurations
- Resources
- Accessories
OneBite® is an all-in-one system providing exacting midline and horizontal esthetic planes – for both symmetrical and asymmetrical faces. In cases of patients with asymmetrical faces, both bars work independently giving the dentist flexibility to change the angles while still having the ability to change the right and left torque. Other features and benefits include:
- Includes a 90° angle locking position that provides the dentist with right and left torque and right and left movement.
- Universal system that will transfer to any kind of articulator. Dentist and technician are able to use the articulator of their choice.
- Direct communication tool between the dentist and the laboratory.
- Easy to use and disposable.
- Loosen the fastener until you are able to position the horizontal bar at a 90-degree angle from the vertical bar. Snap into place using the nibs and lightly tighten the fastener.
- Slide arch into the rods with the tallest part of the vertical bar going up and the horizontal bar parallel to the arch.
- If the rods are to close to the patient's nose, place the nose extender between the arch and the rods to create more space. Remember to keep the nose extender in your office.
- Place bite registration material on the lower arch of the patient's mouth and on the OneBite arch. Let the patient bite down onto the arch then let the material fully set.
- You are now in an ideal 90-degree angle locking position for symmetrical faces, adjust the horizontal and vertical bar according to the facial features.
- For asymmetrical facial features, the rods can be set to move independently from each other. Take the fastener off the flip the horizontal rod with the nibs facing the fastener. Place the fastener back and tighten.
- Once the records are finalized, twist the fastener until extremely tight.
- To permanently preserve the records, place bite registration material all the way back of the holes and around the fastener.
- When shipping the OneBite, make sure to detach the arch from the rods after your record has been secure.
Symmetrical Faces
- For patients with symmetrical faces Makes sure that the 90-degree angle is locked in place with the nibs snapped into the horizontal bar.
- Place bite registration material on the lower arch of the patient's mouth and on the OneBite arch. Let the patient bite down onto the arch then let the material fully set.
Asymmetrical Faces
- For patients with asymmetrical faces, unsnap the vertical bar from the horizontal bar, flip it over and refasten the screw.
- Now both bars work independently from each other giving the dentist flexibility to change the angles while still having the ability at the same time, to change the right and left torque and the right and left movement. OneBite is an all-in-one system, which registers exacting midline and horizontal esthetic planes.
- Place bite registration material on the lower arch of the patient's mouth and on the OneBite arch. Let the patient bite down onto the arch then let the material fully set.
Avoiding Three Common Mistakes
- To finalize the midline and horizontal line angles with the OneBite System, make sure to tighten the front knob.
- To lock the record apply bite material to the sides of the knob and inside the middle of the knob.
- When you send the case to your laboratory, make sure to separate the midline bars from the arch so the record doesn't get damaged during shipping.
The OneBite is a universal product that will save the dentist time while creating the perfect record every time.
Step-by-step OneBite instructional video.
OneBite Facial Plane Relator (Item Number: 052148): 48-Pack
View case study Simplifying Laboratory Communication: The Dental Midline Position, Incisal Cant and Incisal Horizontal Plane by Dr. Leendert Boksman, DDS, FADI, FICD
Recommended Bite Registration Material: Clinician's Choice Affinity Quick Bite Registration Material
