Clinician's Choice® True™ Dental Dam provides the fit, seal and isolation you demand for better clinical outcomes. Features and benefits include:
Easily punched, stretched and placed supporting ef...
Ultradentâ„¢ OpalDamâ„¢ light-cured resin barrier is a passively adhesive (sealing) methacrylate-based resin barrier used for isolating tissue adjacent to teeth being whitened. For single-tooth whiteni...
Use OraSealâ„¢ Caulking material when an adequate seal is difficult to obtain with compromised teeth or roots. OraSeal Caulking material may also be used to repair rubber dam leaks. It seals the rubb...
Black Oxide Rubber Dam Clamps are made of special spring tempered stainless steel offering ideal spring action and maximum corrosion resistance. Other features and benefits include:
Lusterless bla...
The 4ZR, for really tough jobs, meets the challenges of cutting through all-ceramic crowns, especially those made of extremely hard ceramic materials such as zirconium dioxide or lithium disilicate...
The Umbrella tongue, lip, and cheek retractor is an innovative retractor that provides clear access to all areas of the mouth while prioritizing patient comfort. Rather than pulling or stretching t...
Margin trimmer/occlusal trimming. Fine (46 µm) diamond grit.
Indications for Use
Working on fillings.
Looking for a way to easily switch to Komet burs? Download and then print a Komet Bur Conversi...
Komet's 6856 is a coarse, tapered chamfer diamond bur. Matches H375R carbide finisher series.
This diamond bur shape is also available in the following grits:
8856 - Fine grit
5856 - Super-coa...
H1 tungsten carbide is a round shaped bur ideal for oral surgery and cavity preparation. One of the most popular dental burs.
The H1 can be used on the following:
Cutting and excavating tooth s...
DermaDamâ„¢ Rubber Dam
DermaDam rubber dam is made from pure latex rubber and is powder free, which reduces the possibility of latex reactions. Quality processing ensures a low content of surface pro...
These bur blocks are made of stainless steel with blue silicone plugs. Any Komet® friction grip or contra-angle instruments stored in these bur blocks can be cleaned and disinfected in an instrumen...
The newest addition to the team of Komet's crown cutters is Jackieâ„¢ (4ZRS), which addresses the challenge of removing adhesive-bonded, all-ceramic crowns. Optimized for use on zirconia and other hi...
PropGard™ mouth prop’s wedge design prevents contamination from tongue and mouth closure and also helps protect the tongue from trauma. Scrub with a brush, disinfect, and cold sterile (do not autoc...
Komet 6862 is a coarse grit (green band) Feather Edge shape diamond bur. Matches H48L carbide finisher series.
Also available in a fine grit - 8862 feather edge diamond bur.
Indications for Use
Cro...
Komet's 8955/FSD3F is a fine grit (red) pointed diamond used for facial surface trimming. Matches H132/FS3 carbide finisher series. For a more fine version of this bur see 955EF.
Indications for U...
Komet's 8862 is a feather edge-shaped, fine grit (red) diamond for crown preparation and composite finishing. Matches H48L carbide finisher series.
This feather edge diamond bur is available in the...
The 6801 is a coarse grit round finishing diamond for access through natural tooth.
Also available in other grits:
801EF (extra-fine) diamond bur
8801 fine grit diamond finishing bur
801 medium gr...
Komet's H379 is an egg / football shaped tungsten carbide with 12 blades (red band). Matches 379XC Deep Purpleâ„¢ diamond preparation bur and 8379 diamond series.
The H379 can be used for the followi...
For use on palatal/occlusal surfaces. Egg/football shape.
Until recently, composite restorations required three finishing steps, using standard, fine, and ultra-fine finishing instruments. Incorpo...
8856 is a fine grit, tapered chamfer diamond bur.
This diamond bur shape is also available in the following:
6856 - Coarse grit
5856 - Super-coarse grit
856XC - Extra-coarse grit
H375R -...
Komet's 5856 is a super-coarse, tapered chamfer diamond bur. Matches H375R carbide finisher series.
This diamond bur shape is also available in the following grits:
8856 - Fine grit
6856 - Coa...
Komet's 6835 is a cylinder-shaped short diamond bur with the coarse grit (green band).
Indications for Use
Cavity preparation.
Looking for a way to easily switch to Komet burs? Download and then p...
Komet® USA and Bioclear™ have partnered to create a customized Bioclear kit. The kit provides dental burs needed to complete the Bioclear method in an efficient and safe way.
The kit contains the f...
Komet's 830 is a pear-shaped diamond preparation bur used in operative dentistry procedures. Medium grit, 170 microns.
Indications for Use
Cavity preparation.
Looking for a way to easily switch to...
H245 is a tungsten carbide operative bur, pear-shaped, with a length of 2,8 mm. H245 can be used for cavity preparation, trimming, and finishing.
H245 in size 008 is also referred to as #245.
Maxim...
CeraBur® (K1SM) is a ceramic round cavity preparation bur.
The CeraBur K1SM facilitates controlled, intuitive excavation, enabling the user to feel when the instrument leaves the carious, soft dent...
The 801 is a medium-grit round finishing diamond. It is most often used for crown preparation and preparing the access cavity during root canal treatments.
Matches H1 (#2, 4, 6, and 8) tungsten car...
The most popular #330 pear-shaped tungsten carbide bur.
Komet's H7 (330) has a pear shape that is very effective for minimally invasive cavity preparations, ensuring that there isn’t too much tooth...
Komet's 8392 is an interproximal trimming "mosquito" needle shaped bur. Fine (46 µm) diamond grit (red band).
The 8392 can be used for quick, yet precise interproximal trimming and contouring.
Usin...
The InterGuardâ„¢ proxitector ensures a faster, safer preparation by protecting the adjacent tooth from iatrogenic damage.1 Stable curls at each end leave transition angles clear for full access. The...
