Komet's H141 tungsten carbide is a metal and bone cutter, round, with high-efficiency cutting design.
Indications for Use
Oral surgery.
Looking for a way to easily switch to Komet burs? Download an...
Carbide milling cutter GSQ
For processing soft materials such as silicone and soft acrylics.
Whether working out or fine-tuning temporary restorations or soft plastics in the laboratory – the high-...
Komet's H254LE is 31 mm in length, tapered tungsten carbide bur with a transverse tip for conservative preparation of bone tissue and hard tooth structure. Features and benefits include:
Tissue-...
For acrylics and metal alloys. Sold individually. Other features and benefits include:
Size Ø: 060 1/10 mm
L1 in mm: 14.0 mm
Maximum Speed: 50,000
Indications for Use
Crown and bridge technique....
Komet's 9641M is a medium-grit extra-oral acrylic polisher. Comes in a 5-pack. Other features:
Recommended Speed: 6,000
Size: 100
Size Ø: 100 1/10 mm
L1 in mm: 25.0 mm
Maximum Speed: 10,...
Komet's 305 mandrel is used for discs, polishers and brushes. Other features include:
Made from stainless steel
Sizes: 050 (050 1/10 mm) and 080 (080 and 1/10 mm)
Maximum Speed: 15,000 for the siz...
Komet's 9486 is a highly durable abrasive polisher used for removing, rounding, smoothing and polishing plastics and acrylics in the dental lab or practice as a part of 3D printing post-processing....
Komet's 6924 is a spiral-reinforced disc with a honeycomb design. For plaster/stone dies, not recommended for ceramic.
Indications for Use
Crown and bridge technique.
Clinical Technique
6...
Flexible, double-sided, fine grit. For separating and rough contouring of ceramics. Sold individually. Other features and benefits:
Size Ø: 220 1/10 mm
L1 in mm: 0.18 mm
Maximum Speed: 20,000
In...
For acrylics, plaster and metal alloys. Sold individually.
Indications for Use
Crown and bridge technique.
Technical Details
H79E: Technical Details.
Configurations
HP/Handpiece Shank:...
The H71E is a carbide cutter used on acrylics, plaster and metal alloys. Sold Individually. Other features and benefits include:
Long service life due to the high number of blades.
Designed with s...
Komet's 946 is a flexible, serrated, double-sided diamond disc. For separating and contouring acrylics. Comes mounted on a mandrel. Sold individually.
Indications for Use
Acrylic technique.
Clinica...
Carbide milling cutter GTI
For machining titanium and titanium alloys.
With a smaller number of cutting edges and the coarse cross-serration, a particularly aggressive cutting behaviour is achieved...
For acrylics and metal alloys. Sold individually. Other features and benefits include:
Size Ø: 023 1/10 mm
L1 in mm: 13.0 mm
Maximum Speed: 100,000
Indications for Use
Crown and bridge technique...
For acrylics and metal alloys. Sold individually. Other features and benefits include:
Size Ø: 023 1/10 mm
L1 in mm: 8.0 mm
Maximum Speed: 100,000
Indications for Use
Crown and bridge technique....
The K251ACR Ceramic Cutter is a convex-shaped cutter used for adjusting hard acrylics. The all-white ceramic cutters are engineered to cut with absolute precision, reduce clogging and are resistant...
The K79ACR Ceramic Cutter is a cutter used for adjusting hard acrylics. Sold individually. The all-white ceramic cutters are engineered to cut with absolute precision, reduce clogging and are resis...
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
