Komet's H33L is a cross-cut tapered fissure long operative tungsten carbide bur. Also available in HP shank.
Available in US Numbers:
699L - Komet's 009
700L - Komet's 010
701L - Komet's 012...
Komet's 835 is a cylinder short shaped diamond preparation bur with medium grit.
Indications for Use
Crown and bridge technique & cavity preparation
Looking for a way to easily switch to Komet...
Komet's 10839 is an end cutting diamond for lowering the preparation limit following modified shoulder preparation with 837KR/837LKR series or for creating a flat preparation floor in the cavity, e...
Komet's 845KR is a modified taper diamond bur with rounded edge for an inlay/onlay preparation. Medium grit, 107 microns.
Indications for Use
Cavity preparation, inlay/onlay prep.
Looking for a wa...
847KRXC diamond bur features modified tapered shoulder and extra-coarse grit. Matches 8847KR diamond or H336 carbide finisher series.
Crown Preparation I Deep Purple™
Delivering high performance, c...
The H4MCXL is a tungsten carbide crown cutter for metal and ceramics. Ideal for cutting PFM and hard-metal crowns. This ingenious instrument cuts through ceramic veneering and the underlying metal ...
Komet 6847KR is a tapered shoulder diamond preparation bur with a modified design. Matches H336 carbide finisher series.
Indications for Use
Crown preparation.
Looking for a way to easily switch ...
8370 OccluShaper is a finishing diamond bur with fine (46 µm) grit.
The innovative OccluShaper (8370) finishing diamond has a fine grit and offers a minimally invasive approach to precise preparati...
The Metal Dento-Infusor™ tip with the Dual Thread and Luer-Lock style hub is a delivery tip that features the pre-bent needle with a brush-padded end. Soft padded brush end is optimized for quick, ...
Komet's 5811 is a barrel-shaped diamond bur for occlusal/lingual reduction. Super-coarse (180 microns).
Indications for Use
Crown preparation.
Looking for a way to easily switch to Komet burs? Down...
Komet's 8956 (also known as FSD4F) short pointed diamond bur with a fine grit (red band) for facial trimming. Matches H133/FS4 carbide finisher series.
Specifications:
Size: 010
Size Ø: 010 1/10 m...
Komet's ZR8379L is an egg-shaped diamond bur with a long neck. For grinding all types of ceramics including zirconia. It is a part of ZR-Diamonds™ series.
About ZrO2 | ZR-Diamonds™
Offering a combi...
Komet's H375R is a tapered chamfer tungsten carbide finishing bur. Matches 856XC Deep Purple™ diamond preparation bur and 8856 diamond series. 12 blades, normal. Available in FG and FGSS shanks.
So...
Tapered chamfer long. Matches 850XC Deep Purple™ diamond preparation bur.
Indications for Use
Crown preparation.
Looking for a way to easily switch to Komet burs? Download and then print a Komet Bu...
Komet's 859 surgical diamond bur matches H135/FS9 carbide finisher series. Has a needle shape and features a medium grit.
Indications for Use
Oral surgery, crown preparation, crown and bridge techn...
Komet's 5850 is a tapered chamfer long diamond bur. Super coarse (180 microns).
Indications for Use
Crown preparation.
Looking for a way to easily switch to Komet burs? Download and then print a K...
Komet's 5847KR is a super-coarse (180 microns) modified tapered shoulder diamond bur. Matches H336 carbide finisher series.
Indications for Use
Crown preparation.
Looking for a way to easily swit...
Komet's 8957 (US Numbers OSD3 and OSD2) prep diamond matches H247/OS2, OS3 carbide finisher series. 8957 (OSD3, OSD2) has a fine grit (red band), 46 microns.
Indications for Use
Working on filling...
Komet's H246M is the Midwest Version (MWV) tungsten carbide finishing bur which has a gold coated shank and is a flame-shaped with 12 blades.
The US numbers for H246M sizes are:
H246M.009 is th...
The 379 diamond bur is medium grit, football/egg shaped and used for occlusal adjustments.
Matches the following carbide finishers: H379 and H379Q.
Indications for Use
Crown and bridge technique, ...
The H4MCL is a carbide cutter ideal for cutting PFM and hard-metal crowns. This ingenious instrument cuts through ceramic veneering and the underlying metal structure without requiring instrument c...
Modified tapered shoulder - matches 847KRXC Deep Purple™ diamond preparation bur and 8847KR diamond series - 12 blades, normal.
Indications for Use
Crown preparation.
Looking for a way to easily sw...
The Komet 6379 is an egg-shaped diamond preparation bur. Matches H379 carbide finisher series.
Size: 023
Size Ø: 023 1/10 mm
L1 in mm: 4.2 mm
Maximum Speed: 300,000
Indications for Use
Cr...
Ultrapak™ is a 100% cotton, gingival retraction cord knitted into thousands of tiny interlocking loops that exert a gentle continuous outward force following placement.
Ultrapak’s proprietary knitt...
Komet's 8889 is a flame-shaped (needle) small preparation diamond bur. Fine grit, 46 microns.
For micropreparation, consider using 889M Small Flame Micropreparation Diamond Bur.
Indications for Us...
Komet 868B is a depth marker for veneer technique. Tapered. Cutting depth - Matches 868 diamond preparation instrument. Other features and benefits include:
L1 in mm: 7.0 mm
Maximum Speed: 16,000
...
LD/ZR Prep Kit - LD1316A is used for all-ceramic preparation.
The kit contains the following Komet burs:
5858.FG.014 - Narrow Taper for Breaking Contact
379XC.FG.023 - X-Coarse Football
843KRA....
Komet's 8881 is a parallel chamfer diamond preparation bur. Fine grit (red band), 46 microns. Matches H339 carbide finisher series.
Indications for Use
Crown Preparation.
Looking for a way to easi...
Komet's ZR6801 is a round diamond bur for grinding all types of ceramics, including zirconia. Also is used for endo access. ZR6801 is a part of the ZR-Diamonds™ series.
ZrO2 | ZR-Diamonds™
Offering...
The H35L crown cutter features a special blade geometry that permits cutting through non-precious metal and gold with minimal effort. Its slim neck simplifies work along the entire length of the in...
Komet's H34L is an intra-oral tungsten carbide crown remover used to quickly and easily remove metal and non-precious metal crowns and appliances. Apply crown remover at an angle of 45° to the crow...
