H245 is a tungsten carbide operative bur, pear-shaped, with a length of 2,8 mm. H245 can be used for cavity preparation, trimming, and finishing.
H245 in size 008 is also referred to as 245 bur.
Ma...
Komet's 5850 is a tapered chamfer long diamond bur. Super coarse (180 microns).
Indications for Use
Crown preparation.
Looking for a way to easily switch to Komet burs? Download and then print a K...
Modified tapered chamfer - matches 878KXC Deep Purple™ diamond preparation bur and 878K diamond series - 10-12 blades depending on size.
Indications for Use
Crown preparation.
Looking for a way to ...
Pointed.
Indications for Use
Crown preparation.
Looking for a way to easily switch to Komet burs? Download and then print a Komet Bur Conversion Card here:Click Here
Clinical Technique
Technic...
Komet H31 is a cylinder carbide featuring cross-cut fissures and used for cavity preparation and for bone cutting in oral surgeries.
H31 is available with a friction grip (FG), friction grip short ...
Komet's 859 surgical diamond bur matches H135/FS9 carbide finisher series. Has a needle shape and features a medium grit.
Indications for Use
Oral surgery, crown preparation, crown and bridge techn...
The newest addition to the team of Komet's crown cutters is Jackie™ (4ZRS zirconia cutter diamond bur), which addresses the challenge of removing adhesive-bonded, all-ceramic crowns. Optimized for ...
Komet's 6830 is a pear-shaped coarse (green band) diamond bur. Ideal for Class I cavity preparation.
Also available in a medium grit as 830 diamond bur.
Indications for Use
Cavity preparation.
Look...
Komet's 5856 is a super-coarse, tapered chamfer diamond bur. Matches H375R carbide finisher series.
This diamond bur shape is also available in the following grits:
8856 - Fine grit
6856 - Coa...
For cutting through full metal and PFM restorations during endodontic access. Golden shank.
Apply the crown remover at an angle of 45°.
Indications for Use
Crown removal.
Looking for a way to easil...
Komet's FS6 (H134) is a facial surface trimmer with a safe-end tip. Features 8 blades, normal. Matches 8852/FSD6F diamond series. Also available as a fine facial surface trimmer - FS6F (H134F).
Spe...
Komet's H379 is an egg / football shaped tungsten carbide with 12 blades (red band). Matches 379XC Deep Purple™ diamond preparation bur and 8379 diamond series.
The H379 can be used for the followi...
Komet's 5835 is a cylinder short diamond bur. Super coarse, 180 microns. Available in a Fiction Grip shank (FG) and Fiction Grip Short Shank (FGSS).
Indications for Use
Cavity preparation for inlay...
Rotary diamond discs for interproximal enamel reduction in orthodontic treatment. Other features and benefits include:
Five discs with thicknesses 0.15 mm, 0.20 mm, or 0.30 mm to be used sequentia...
The 379 diamond bur is medium grit, football/egg shaped and used for occlusal adjustments.
Matches the following carbide finishers: H379 and H379Q.
Indications for Use
Crown and bridge technique, ...
The most popular #330 pear-shaped tungsten carbide bur.
Komet's H7 (330) has a pear shape that is very effective for minimally invasive cavity preparations, ensuring that there isn’t too much tooth...
These bur blocks are made of stainless steel with blue silicone plugs. Any Komet® friction grip or contra-angle instruments stored in these bur blocks can be cleaned and disinfected in an instrumen...
Komet's 379XC Deep Purple™ is an egg/football-shaped diamond bur for occlusal/lingual reduction featuring extra-coarse grit. Matches 8379 diamond series and H379 carbide finisher series.
Crown Prep...
KS1SC is a parallel chamfer diamond prep bur. Super-coarse, 180 microns (black band). Matches H881U carbide prep series. KS1SC features diamond grit uniform in size and evenly distributed on the bu...
Komet's 5847KR is a super-coarse (180 microns) modified tapered shoulder diamond bur. Matches H336 carbide finisher series.
Indications for Use
Crown preparation.
Looking for a way to easily swit...
Komet's 5379 is a super-coarse, egg-shaped diamond bur used for occlusal/lingual reduction. Matches H379 carbide finisher series.
Indications for Use
Working on fillings.
Looking for a way to easil...
FS9F (H135F) is an extra-fine facial surface trimmer. This tungsten carbide bur features 16 blades (yellow band) and a working length of 9 mm. Matches 859EF/FSD9EF diamond series. Other features an...
For a remarkably quick removal of amalgam fillings without adverse health effects. The removal of old amalgam fillings has always been a topic of discussion in the dental practice. Besides the aspe...
Komet's H246 is a flame-shaped tungsten carbide bur with 12 blades. Used for trimming and finishing.
The most popular sizes in FG and HP shanks are:
H246.009 is the US size 7901
H246.010 is the...
Komet's 8392 is an interproximal trimming "mosquito" needle shaped bur. Fine (46 µm) diamond grit (red band).
The 8392 can be used for quick, yet precise interproximal trimming and contouring.
Usin...
The H4MCL is a carbide cutter ideal for cutting PFM and hard-metal crowns. This ingenious instrument cuts through ceramic veneering and the underlying metal structure without requiring instrument c...
Designed to precisely mark preparation depth prior to restoration, the new Komet® PrepMarker® instrument maximizes restorative success and predictability. Features and benefits include:
Reliably a...
H1SE is a round tungsten carbide bur with a high-efficiency cutting design for excavating and cross-cut.
H1SE (blue) shows reduced vibration compared to conventional round burs.
Features sta...
8905 diamond bur has an acorn shape which is ideal for occlusal trimming. Fine grit, 46 microns. FGSS (Fiction Grip Short Shank).
Indications for Use
Working on fillings, occlusal trimming.
Looking...
ZR8801L is a round diamond bur for grinding all types of ceramics, including zirconia. ZR8801L is a part of the ZR-Diamonds™ series. Available in FGL (Friction Grip Long) shank.
Size: 010
Size Ø: ...
ZR8379 is an egg-shaped diamond bur for grinding all types of ceramics including zirconia. Fine grit.
Size: 014
Size Ø: 014 1/10 mm
L1 in mm: 2.8 mm
Maximum Speed: 450,000
This ZR egg-sha...
Komet's ZR972 features a taper round end (also called a "grenade" shape) and is used for grinding off all types of ceramics including zirconia. ZR972 is a part of the ZR-Diamonds™ series.
ZrO2 | ZR...
