Vit-l-escence Trans Ice Syringe
Vit-l-escence Trans-Ice Compules
Load image into Gallery viewer, Vit-l-escence Trans Ice Syringe
Load image into Gallery viewer, Vit-l-escence Trans-Ice Compules

Ultradent™ Vit-l-escence™ Trans Ice Aligner Attachment Composite

CRD Item Number: 745479

Manufacturer SKU: 479

Ultradent

Shipping calculated at checkout.

Login to Shop
This is a pre order item. We will ship it when it comes in stock.
Add To Wishlist

Vit-l-escence™ Trans Ice is an aligner attachment composite that gives patients the best colour match attachments. Other features and benefits include:

  • A highly polishable and extremely durable micro-hybrid resin
  • Superior handling characteristics
  • Natural Fluorescence and Opalescence
  • Shelf life of 60 months
  • Fluoresces under black light for easy removal and spot checking any voids


2021 4 Star 2020 4 Star 2019 4 Star

Bonding Aligner Attachment Steps

  1. Clean the teeth with Ultrapro™ TX Pure fluoride free prophy paste.

  2. Isolate using Umbrella™ tongue, lip, and cheek retractors as well as cotton rolls and dry angles as required.

    isolate using umbrella tongue lip cheek retractor

  3. Etch enamel where the attachments are to be placed with Ultra-Etch 35% phosphoric acid for 15 seconds.

  4. Rinse thoroughly with water. Gently air dry.

  5. Using a microbrush, apply MPa™ Universal Adhesive to etched enamel and scrub in gently.

  6. Air thin gently to evaporate solvent.

  7. Light cure for 10 seconds using a VALO™ LED curing light.

    Light-cure each attachment using the VALO™ LED curing light.

  8. Apply Vit-l-escence™ Trans Ice aligner composite into the attachments on the template aligner tray.

    Apply Vit-l-escence Trans Ice aligner composite into the attachments on the template aligner tray.

  9. Apply gentle pressure to properly seat filled aligner tray onto the patient's teeth.

    Apply gentle pressure to properly seat filled aligner tray onto the patient's teeth.

  10. Light-cure each attachment using the VALO™ LED curing light.

    Light-cure each attachment using the VALO™ LED curing light.

  11. Remove template aligner tray and remove any excess cured composite material (this can be done with either a Komet H246M Flame or Komet H379 Egg finishing bur).


TIPS & TRICKS:

Preload in advance of appointment your aligner template trays with Vit-l-escence™ Trans Ice and store in a black model box. This will reduce your chair time and allow you to focus on isolation at the time of bonding.

    1. Make sure your attachments are well defined and adapted to the tray. Pack the Vit-l-escence™ Trans Ice against the tray using a plastic instrument. This will help the teeth to move properly during treatment.
    1. Slightly overfill the attachment area of the template aligner and apply pressure to remove air bubbles. Too much composite will result in excess flash.
    1. You can use ViscoStat™ (20% ferric sulfate) on the tissue prior to etching and bonding attachments to control sulcular fluid control.
    1. Be sure to turn away overhead lights, as Vit-l-escence™ Trans Ice is very translucent.
    1. Vit-l-escence Trans Ice has fluorescent properties, so you can use a VALO™ black light lens to see the attachments, making removal easier at the end of treatment.

If placing attachments on crowned teeth, use the following steps:

PORCELAIN CROWNS (i.e., Lithium Disilicate)

  • Use Porcelain Etch (9% hydrofluoric acid) to etch porcelain (be very careful when doing intraorally), rinse off acid, dry and place silane on etched porcelain. Place template aligner loaded with composite resin and light cure.

ZIRCONIA OR METAL CROWNS 

  • Microetch (sandblast with Aluminum Oxide) area on crown where attachment will be placed. Rinse and dry. Place a zirconia primer (MDP) on all areas that were microetched. Place template aligner loaded with composite resin and light cure.

Vit-l-escence™ Trans Ice Aligner Attachment Composite is available in the following sizes:

  • 2.5 g Syringe (Item Number: 745479)
  • 10 x 0.3 g Compules (741245)


View the Product Allergen Information.