Komet's H339 is a parallel chamfer finishing tungsten carbide bur. 10-12 blades, depending on the size. Matches 881 diamond series (for example, 6881 parallel chamfer diamond bur and 8881 parallel ...
Crosscut tapered fissure long. HP shank.
Indications for Use
Oral surgery, cavity preparation or crown and bridge technique, and laboratory use.
Looking for a way to easily switch to Komet burs? Do...
H33RS is a surgical tungsten carbide bur featuring crosscut tapered fissure and a round end - high-efficiency cutting design.
H33RS.FG.010 is also known as 1700S
H33RS.FG.012 is also known as ...
Komet's H34 is a crown removal tungsten carbide bur for metal crowns.
Size: 012
Size Ø: 012 1/10 mm
L1 in mm: 2.0 mm
Maximum Speed: 450,000
Indications for Use
For metal crowns - apply cr...
For metal crowns - Apply crown remover at an angle of 45°.
Indications for Use
Crown removal.
Looking for a way to easily switch to Komet burs? Download and then print a Komet Bur Conversion Card h...
For acrylics and metal alloys. Individually sold.
Indications for Use
Crown and bridge technique.
Technical Details
H351E: Technical Details.
Configurations
HP/Handpiece Shank:
H351E.H...
For acrylics and metal alloys. Sold individually.
Indications for Use
Crown and bridge technique.
Technical Details
H351EF: Technical Details.
Configurations
HP/Handpiece Shank:
H351E...
Carbide cutter FSQ for all hard or elastic acrylics and precious metals.
FSQ milling cutters have high-performance teeth with a cross-cut and are suitable for all hard or elastic acrylics and preci...
Carbide milling cutter GSQ
For processing soft materials such as silicone and soft acrylics.
Whether working out or fine-tuning temporary restorations or soft plastics in the laboratory – the high-...
The H35L crown cutter features a special blade geometry that permits cutting through non-precious metal and gold with minimal effort. Its slim neck simplifies work along the entire length of the in...
For acrylics, plaster and metal alloys. Sold individually.
Indications for Use
Milling technique, crown and bridge technique.
Technical Details
H364RE: Technical Details.
Configuration...
Komet's H375R is a tapered chamfer tungsten carbide finishing bur. Matches 856XC Deep Purple™ diamond preparation bur and 8856 diamond series. 12 blades, normal. Available in FG and FGSS shanks.
So...
Labial.
Until recently, composite restorations required three finishing steps, using standard, fine, and ultra-fine finishing instruments. Incorporating an innovative toothing structure, Q-Finisher...
Komet's H379 is an egg / football shaped tungsten carbide with 12 blades (red band). Matches 379XC Deep Purple™ diamond preparation bur and 8379 diamond series.
The H379 can be used for the followi...
Komet's H379AGK is a football tungsten carbide bur for palatal adhesive removal during orthodontic debonding procedures. It features a safe end and golden shank. Other features and benefits include...
Komet's H379Q is a football-shaped tungsten carbide bur with unique cross-cut toothing that makes palatal/occlusal adjustments, composite finishing, and debonding more accurate and efficient.
Until...
For cutting through full metal and PFM restorations during endodontic access. Golden shank.
Apply the crown remover at an angle of 45°.
Indications for Use
Crown removal.
Looking for a way to easil...
H41 Round - Matches S6801 S-Diamond Round Preparation Bur
12-24 blades depending on size.
Indications for Use
Working on fillings.
Looking for a way to easily switch to Komet burs? Download and th...
Pear long - 12 blades, normal. Matches S-Diamond S6830L. Other features and benefits include:
L1 in mm: 4.4mm.
Max. RPM: 450,000.
Indications for Use
Cavity Preparation.
Looking for a way to eas...
Komet's H48L is a feather edge, finishing and trimming carbide bur for debonding and composite finishing. 12 blades, fine. Matches 862 diamond series (for example, 8862 Feather Edge Diamond Bur, fi...
Komet's H48LQ is a tungsten carbide finisher for use on facial/labial surfaces.
Unique cross-cut design is pressure sensitive, allowing for the same bur to remove the bulk and finish the surface...
Labial, extra long.
Until recently, composite restorations required three finishing steps, using standard, fine, and ultra-fine finishing instruments. Incorporating an innovative toothing structure...
The H4MCL is a carbide cutter ideal for cutting PFM and hard-metal crowns. This ingenious instrument cuts through ceramic veneering and the underlying metal structure without requiring instrument c...
The H4MCXL is a tungsten carbide crown cutter for metal and ceramics. Ideal for cutting PFM and hard-metal crowns. This ingenious instrument cuts through ceramic veneering and the underlying metal ...
The most popular #330 pear-shaped tungsten carbide bur.
Komet's H7 (330) has a pear shape that is very effective for minimally invasive cavity preparations, ensuring that there isn’t too much tooth...
The H71E is a carbide cutter used on acrylics, plaster and metal alloys. Sold Individually. Other features and benefits include:
Long service life due to the high number of blades.
Designed with s...
For acrylics, plaster and metal alloys. Sold individually. Other features and benefits include:
Size Ø: 060 1/10 mm
L1 in mm: 12.0 mm
Maximum Speed: 50,000
Indications for Use
Acrylic technique....
Carbide milling cutter SGFA
For quick processing of dry and moist plaster
The further development of the proven, super-coarse SGFA toothing guarantees safe and high-quality work. The combination of...
For acrylics, plaster and metal alloys. Sold individually.
Technical Details
H73E: Technical Details.
Configurations
Handpiece Shank:
H73E.HP.012: Sold Individually (Item Number: 336...
For acrylics and metal alloys. Sold individually. Other features and benefits include:
Size Ø: 023 1/10 mm
L1 in mm: 4.2 mm
Maximum Speed: 100,000
Indications for Use
Crown and bridge technique.
...
For precious metal alloys - ultrafine staggered toothing. Sold individually. Other features and benefits include:
Size Ø: 014 1/10 mm
L1 in mm: 3.1 mm
Maximum Speed: 100,000
Technical Details
C...
