The Komet 6379 is an egg-shaped diamond preparation bur. Matches H379 carbide finisher series.
Size: 023
Size Ø: 023 1/10 mm
L1 in mm: 4.2 mm
Maximum Speed: 300,000
Indications for Use
Cr...
Komet's 5379 is a super-coarse, egg-shaped diamond bur used for occlusal/lingual reduction. Matches H379 carbide finisher series.
Indications for Use
Working on fillings.
Looking for a way to easil...
Tapered chamfer short.
Indications for Use
Crown preparation.
Looking for a way to easily switch to Komet burs? Download and then print a Komet Bur Conversion Card here:Click Here
Clinical Techni...
Komet's 8889 is a flame-shaped (needle) small preparation diamond bur. Fine grit, 46 microns.
For micropreparation, consider using 889M Small Flame Micropreparation Diamond Bur.
Indications for Us...
Komet's 5847 is a tapered shoulder, super coarse (180 microns) diamond bur for preparing the tooth for a shoulder crown preparation. Matches H375 carbide finisher series.
Due to its small size the ...
Komet's 8888 is a feather edge slim diamond bur.
Size: 012
Size Ø: 012 1/10 mm
L1 in mm: 8.0 mm
Maximum Speed: 300,000
Indications for Use
Crown preparation.
Looking for a way to easily s...
The H4MCL is a carbide cutter ideal for cutting PFM and hard-metal crowns. This ingenious instrument cuts through ceramic veneering and the underlying metal structure without requiring instrument c...
Komet's 8881 is a parallel chamfer diamond preparation bur. Fine grit (red band), 46 microns. Matches H339 carbide finisher series.
Indications for Use
Crown Preparation.
Looking for a way to easi...
889M is a lance-shaped (small flame) diamond bur with a slim neck ideal for micropreparation.
Specifications:
Size: 007
Size Ø: 007 1/10 mm
L1 in mm: 2.7 mm
Maximum Speed: 300,000
Indicat...
H1SE is a round tungsten carbide bur with a high-efficiency cutting design for excavating and cross-cut.
H1SE (blue) shows reduced vibration compared to conventional round burs.
Features sta...
Occlusal - cutting tip.
Composite | Q-Finishers
Until recently, composite restorations required three finishing steps, using standard, fine, and ultra-fine finishing instruments. Incorporating an i...
Komet's ZR6801 is a round diamond bur for grinding all types of ceramics, including zirconia. Also is used for endo access. ZR6801 is a part of the ZR-Diamondsâ„¢ series.
ZrO2 | ZR-Diamondsâ„¢
Offering...
Komet's 379EF is an egg/football shape diamond with an extra-fine grit (25 microns). Perfect for occlusal/lingual reduction. Matches H379 carbide finisher series.
Indications for Use
Working on fil...
Matches 8859/FSD9F diamond series - 8 blades, normal, safe end.
Indications for Use
Working on fillings.
Looking for a way to easily switch to Komet burs? Download and then print a Komet Bur Conver...
Komet's FS6 H134 features 8 blades and a safe end. Matches 8852/FSD6F diamond series.
Specifications:
Size: 014
Size Ø: 014 1/10 mm
L1 in mm: 6.0 mm
Maximum Speed: 450,000
US Number: FS6...
LD/ZR Prep Kit - LD1316A is used for all-ceramic preparation.
The kit contains the following Komet burs:
5858.FG.014 - Narrow Taper for Breaking Contact
379XC.FG.023 - X-Coarse Football
843KRA....
Modified cylinder short.
Indications for Use
Cavity preparation.
Looking for a way to easily switch to Komet burs? Download and then print a Komet Bur Conversion Card here:
Click Here
Clinical Tech...
The 8852 bur is also referred to as FSD6F bur (facial surface trimming bur, 6 mm, fine).
Komet's 8852 (FSD6F) is a tapered point, fine grit (red) facial surface trimming diamond.
Matches H134/FS6 c...
KS3SC is a parallel chamfer diamond prep bur. Matches H881U carbide prep series.
Indications for Use
Crown preparation.
Looking for a way to easily switch to Komet burs? Download and then print a K...
Komet's 392EF is an interproximal trimming "mosquito" needle-shaped diamond bur. Extra Fine (25 µm) diamond grit.
Other features include:
Size: 016
Size Ø: 016 1/10 mm
L1 in mm: 5.0 mm
Max...
Komet's 6881 is a parallel chamfer diamond bur. Coarse grit (green band), 151 microns. Matches H339 carbide finisher series.
Indications for Use
Crown preparation.
Looking for a way to easily swit...
Komet's ZR6881 is a coarse, cylinder round-shaped diamond bur for cutting all-ceramics. Part of the ZR-Diamondsâ„¢ series. It's one of the best-selling Komet diamond burs.
The ZR6881 is ideal for gro...
838M is a diamond round cylinder bur with modified shoulder and long neck ideal for micropreparation.
Specifications:
Size: 007
Size Ø: 007 1/10 mm
L1 in mm: 2.7 mm
Maximum Speed: 300,000
...
Komet's 830AM is a long neck diamond bur for micropreparation, pear-shaped.
Micro pear tip
Medium grit 107 microns diamond
L1 in mm: 2.7 mm
Maximum Speed: 160,000
Indications for Use
Cavi...
801M is a diamond bur, round, with a long neck ideal for micropreparation.
Specifications
Size: 010
Size Ø: 010 1/10 mm
Maximum Speed: 160,000
Indications for Use
Cavity preparation.
Loo...
Flat end taper - inlay/onlay preparation
Indications for Use
Crown and bridge technique, cavity preparation.
Looking for a way to easily switch to Komet burs? Download and then print a Komet Bur Co...
Komet's ZR8850 is a tapered long diamond bur. Fine grit (red and white bands), 46 microns. For grinding all types of ceramics, including zirconia.
Size: 016
Size Ø: 016 1/10 mm
L1 in mm: 10....
Facial/labial.
Composite | Q-Finishers
Until recently, composite restorations required three finishing steps, using standard, fine, and ultra-fine finishing instruments. Incorporating an innovative...
Konet's H1S is a round tungsten carbide bur with a high-efficiency cutting design.
Indications for Use
Crown and bridge technique, cavity preparation.
Looking for a way to easily switch to Komet bu...
Komet's 6837 is a parallel shoulder diamond preparation bur. Coarse grit (green band), 151 microns.
Indications for Use
Crown preparation.
Looking for a way to easily switch to Komet burs? Download...
