Short parallel step, rounded edge.
Indications for Use
Max. RPM: 450,000
Size Ø: 014 1/10mm
Length: 6.0mm
Looking for a way to easily switch to Komet burs? Download and then print a Komet Bur Co...
845KRD is a modified taper diamond bur with the depth marking at 2 mm. Other features and benefits include:
Size Ø: 025 1/10 mm
Maximum Speed: 450000
Indications for Use
Cavity Preparation
Looki...
6847KRD is a modified tapered shoulder diamond bur with depth marking at 2 and 4 mm. Matches H336 carbide finisher series. Other features and benefits include:
Size Ø: 016 1/10 mm
L1 in mm: 8.0 mm...
Pointed needle diamond bur for working on fillings and as a finisher for occlusal onlays.
Size 010: Max. RPM 300,000. Size Ø: 010 1/10 mm. L1 in mm: 8.0 mm. Angle: 2°.
Size 014: Max. RPM 300,000. S...
94021C is a part of the Komet ZR Flash Polishers family. Diamond interspersed polishers for high-performance ceramics. For pre-polishing and high-shine polishing. Use with spray coolant. For high g...
94021F is a final high-shine polisher and a part of the Komet ZR Flash Polishers family. Diamond interspersed polishers for high-performance ceramics. For pre-polishing, use 94021C. Use with spray ...
94022F is a final high-shine cup polisher and a part of the Komet ZR Flash Polishers family. Use with spray coolant. For pre-polishing, use 94022C. Other features and benefits include:
Recommended...
Carbide milling cutter SGFA
For quick processing of dry and moist plaster
The further development of the proven, super-coarse SGFA toothing guarantees safe and high-quality work. The combination of...
Carbide milling cutter SGFA
For quick processing of dry and moist plaster
The further development of the proven, super-coarse SGFA toothing guarantees safe and high-quality work. The combination of...
Carbide milling cutter ACR
For the rough processing of denture plastics.
The designation ACR stands for acrylic-based materials on which the milling cutter is used. The milling cutter is very easy ...
The K79ACR Ceramic Cutter is a cutter used for adjusting hard acrylics. Sold individually. The all-white ceramic cutters are engineered to cut with absolute precision, reduce clogging and are resis...
The K251ACR Ceramic Cutter is a convex-shaped cutter used for adjusting hard acrylics. The all-white ceramic cutters are engineered to cut with absolute precision, reduce clogging and are resistant...
For acrylics, plaster and metal alloys. Individually sold. Other features and benefits include:
Maximum Speed: 100,000
Indications for Use
Crown and bridge technique.
Technical Details
H...
For acrylics, plaster and metal alloys. Individually sold. Other features and benefits include:
Maximum Speed: 100,000
Indications for Use
Crown and bridge technique.
Technical Details
H...
The H71E is a carbide cutter used on acrylics, plaster and metal alloys. Sold Individually. Other features and benefits include:
Long service life due to the high number of blades.
Designed with s...
For acrylics, plaster and metal alloys. Sold individually. Other features and benefits include:
Size Ø: 060 1/10 mm
L1 in mm: 12.0 mm
Maximum Speed: 50,000
Indications for Use
Acrylic technique....
For acrylics, plaster and metal alloys. Sold individually.
Technical Details
H73E: Technical Details.
Configurations
Handpiece Shank:
H73E.HP.012: Sold Individually (Item Number: 336...
For acrylics, plaster and metal alloys. Sold individually.
Indications for Use
Crown and bridge technique.
Technical Details
H78E: Technical Details.
Configurations
HP/Handpiece Shank:...
For acrylics, plaster and metal alloys.
Indications for Use:
Crown and bridge technique.
Technical Details
H77E: Technical Details.
Configurations
HP/Handpiece Shank:
H77E.HP.014: Sol...
For acrylics, plaster and metal alloys. Sold individually.
Indications for Use
Crown and bridge technique.
Technical Details
H79E: Technical Details.
Configurations
HP/Handpiece Shank:...
For acrylics, plaster and metal alloys. Sold individually. Other features and benefits include:
Size Ø: 023 1/10 mm
L1 in mm: 5.0 mm
Maximum Speed: 100,000
Indications for Use
Crown and bridge t...
For acrylics, plaster and metal alloys. Sold individually. Other features and benefits include:
Size Ø: 040 1/10 mm
L1 in mm: 9.5 mm
Maximum Speed: 100,000
Indications for Use
Crown and bridge t...
For acrylics and metal alloys. Individually sold. Other features and benefits include:
Size Ø: 023 1/10 mm
L1 in mm: 8.0 mm
Maximum Speed: 100,000
Indications for Use
Crown and bridge technique....
For acrylics, plaster and metal alloys. Individually sold. Other features and benefits include:
Size Ø: 040 1/10 mm
L1 in mm: 12.7 mm
Maximum Speed: 100,000
Indications for Use:
Acrylic techniqu...
The H251E is a tungsten carbide cutter specifically designed for trimming acrylic, plaster, and metal alloys. Sold individually. The maximum speed depends on the size:
040: 100,000 rpm max.
060: 5...
For acrylics, plaster and metal alloys. Individually sold. Other features and benefits include:
Size Ø: 023 1/10 mm
L1 in mm: 13.0 mm
Maximum Speed: 100,000
Indications for Use
Crown and bridge ...
For acrylics, plaster and metal alloys. Individually sold. Other features and benefits include:
Size Ø: 023 1/10 mm
L1 in mm: 15.0 mm
Maximum Speed: 100,000
Indications for Use
Crown and bridge ...
For acrylics and metal alloys. Individually sold.
Indications for Use
Crown and bridge technique.
Technical Details
H351E: Technical Details.
Configurations
HP/Handpiece Shank:
H351E.H...
For acrylics, plaster and metal alloys. Sold individually. Other features and benefits include:
Size Ø: 060 1/10 mm
L1 in mm: 14.0 mm
Maximum Speed: 50,000
Indications for Use
Model casting tech...
For acrylics, plaster and metal alloys. Sold individually.
Indications for Use
Milling technique, crown and bridge technique.
Technical Details
H364RE: Technical Details.
Configuration...
For non-precious metal, precious metal and model cast alloys. Sold individually.
Tungsten Carbide Cutters | UM
Komet® UM-Cutters® combine three different types of toothing in a single instrument, e...
For non-precious metals, precious metals and model-cast alloys. Sold individually.
Tungsten Carbide Cutters | UM
Komet® UM-Cutters® combine three different types of toothing in a single instrument,...
