- Product Details
- Clinical Technique
- Technical Details
- Configurations
- Resources
- Accessories
MPa Universal is a single-component light-cure maximum performance adhesive developed for use with the selective-etch, total-etch and self-etch techniques. Other features and benefits include:
- Consistent and High Bond Strengths: MPa Universal provides consistent and high bond strengths regardless of placement technique
- Low Film Thickness: The MPa Universal film thickness (<10 mm) delivers high bond strengths when placing direct or indirect restorations
- No Refrigeration Required: MPa Universal can be stored at room temperature
Direct Light-cure Restorations
Selective Etch
1a. Apply etching gel (ex: Max Etch) onto the enamel surfaces and leave in place for 15 seconds. Rinse for 20 seconds with water and dry with a water-free, oil-free airstream. The etched surface should have a chalky white appearance.
Total Etch
1b. Apply etching gel (ex: Max Etch) onto the enamel and dentin surfaces beginning with the enamel bevels for 15 seconds. Rinse for 20 seconds with water. Dry with a water-free, oil-free airstream.
Self Etch
1c. No etching step required. Move to step 2.
2. Apply MPa Universal with a microbrush onto the entire enamel and dentin surface in a thin layer. Agitate for at least 20 seconds.
3. Air thin gently for at least 5-10 seconds.
4. Light-cure with a suitable light unit.
1 You should always refer to the manufacturer’s instructions for use for the curing light you are using. General guidelines are below.
Indirect Restorations
Selective Etch
1a. Apply etching gel (ex: Max Etch) onto the enamel surfaces and leave in place for at least 15 seconds. Rinse for 20 seconds with water and dry with a water-free, oil-free airstream. The etched surface should have a chalky white appearance.
Total Etch
1b. Apply etching gel (ex: Max Etch) onto the enamel and dentin surfaces beginning with the enamel bevels for at least 15 seconds. Rinse for 20 seconds with water. Dry with a water-free, oil-free airstream.
Self Etch
1c. No etching step required. Move to step 2.
2. Combine one drop of MPa Universal and one drop of MPa Universal Dual-Cure Catalyst in a mixing well and mix for 5-10 seconds under subdued light.
3. Apply the MPa Universal/ MPa Universal Dual-Cure Catalyst mixture with a microbrush, agitate for at least 30 seconds. Repeat procedure 1-2 times.
4. Gently air thin for at least 5-10 seconds.
5. Light-cure with a suitable light unit.
1 You should always refer to the manufacturer’s instructions for use for the curing light you are using. General guidelines are below.
Technique Tolerant
MPa Universal's chemistry provides an effective marginal seal, reduced post-op sensitivity, and a long-lasting bond.
Placement Technique Recommendation Based on Preparation
Room Temperature Storage
MPa Universal contains ethanol and water as solvents. Solvents aid in reducing the viscosity of the adhesive, allowing for better penetration of the dentin. Additionally, after placing the adhesive, a slight stream of air can assist with solvent evaporation, reducing film thickness allowing for a more uniform layer, and ensuring a better cure. This solvent combination remains stable inside the bottle allowing for room temperature storage.
MPa Universal Adhesive 5mL Refill Bottle (Item Number: 267001): 1 x 5mL bottle
MPa Universal Adhesive Unit Dose Refill (267000): 50 x 0.10 mL unit dose
MPa Universal Adhesive 5mL Dual-Cure Catalyst (267002): 1 x 5mL catalyst
Product Information
View the MPa Universal Product Sheet.
Articles and Case Studies
View Ask the Expert: An Interview with Nate Lawson, DMD, PhD on Universal Adhesives.
Technical Documents
View the MPa Universal Adhesive IFU (EN, FR).
Recommended Brushes: Clinician's Choice Microbrushes